Application :
The main function of the disk feeder/disc feeder is to provide material supply for other equipment. The use of the disc feeder enables the material to enter one piece of equipment evenly so that the next process can work normally and saves labor moreover, the utility model protects the performance of the equipment and extends the service life of the whole production line equipment. Disc feeder is an indispensable accessory product of process mining.
A variety of non-adhesive materials as an industrial feeder for transporting powder, or small material, such as coal, cement, clinker, limestone, shale, coal gangue, clay powder, granular or small block material.

Technical Parameters :


Components:

• Disk section: disk, base, bottom frame, body support, transmission mechanism (reducer, motor, coupling, small gear, slewing bearing, etc.)
• Short tube section: short tube, scraper assembly (transferring materials to next process), and sector gate assembly (adjusting the size of the discharge opening)
• Dust cover: configured upon customer's request
• Others: anchor bolts, nuts for tightening, washers, lifting devices (for equipment lifting), etc.

• Frequency conversion motor → coupling → hard tooth reducer → small gear → slewing bearing gear ring → disk transmission structure. The large diameter slewing bearing structure can withstand the pressure of materials in over 20m trough for a long time. Moreover, the slewing bearing has a large resistance to overturning moment, as well as low running resistance and smooth operation, ensuring great stability and uniform disk feeding.
• The reducer and motor are installed below the disk surface, ensuring compact size and reasonable layout, thus small footprint. Simple foundation shape allows for regular arrangement during deployment.
• The reducer is relatively independent of the disk, during maintenance, you only need to remove the reducer, no need for emptying the bin or removing the sleeve and disk surface.
• The short helical tube is designed to prevent material clogging and hanging, ensuring smooth discharge. A maintenance door is provided on the short tube for dealing with blockages and debris cleaning.
• The feed rate is adjusted through an adjustable control gate and the disk's frequency conversion speed regulation, providing a wide adjustment range. After setting, the control gate does not need to be adjusted.
• All transmissions apply oil-immersed lubrication (including slewing bearings and small gears) with multi-stage sealing structures, ensuring good lubrication and sealing of transmission components, and preventing exterior objects from entering the lubrication section.
• The fully enclosed structure ensures no material spillage and no dust flying around the disk.
• The disk surface applies a waffle-patterned liner + wear-resistant liner + minimized liner wearing (by placing materials underneath) structure, ensuring a long service life for the liner.
• All structural parts have undergone shot blasting rust removal treatment to ensure no rusting for over 6 years.
• The PDXJ type disk feeder is a specialized for coal feeding in blast furnace and coking industries. The reducer applies oil-immersed lubrication, featuring compact structure and easy maintenance.
• A dust cover is provided on the upper side of the disk surface, which can also be equipped with a dust removal port connected to the on-site dust removal pipeline, preventing dust from flying, thus ensuring a good working environment.

Company Profile:
Jiangsu Zhongding Environmental Engineering co.,Ltd. currently has over 140 employees and covers an area of 180000 square meters, with a comprehensive production capacity reaches up to $70 million US dollar. Our facility is equipped with advanced manufacturing, testing, and installation equipment, in which production management team constantly learns and practices to enhance our technological and service abilities.

Since the company introduced PDX disc feeder technology from Japan in 1995(before 2013 we called Jiangsu Quanneng Machinery Co., LTD), the PDX series quantitative disc feeder series products have been in good operation in more than 80 steel mills in China such as Wuhan Iron and Steel, Lian Steel, An gang Steel, and exported to India, Malaysia, Brazil, Turkey, Vietnam, Thailand, Venezuela, Congo and other countries. The equipment has the advantages of simple installation and maintenance, reliable operation, energy saving, environmental protection and so on. By the end of 2022, the company has sold 20,000 sets of disc feeders.


FAQ:
Q: Are you a factory ?
A:Yes,we are factory, which was established in 2013.
We start producing disk feeder since 1995 ,when we named Jiangsu Quanneng Machinery Co., LTD.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.

Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or irrevocable L/C at sight before the machines leaving seller' factory.

Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 70 days from the date of receiving the deposit L/C, excluding the time of waiting for shipment.

Q:Guarantee period:
A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.


Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be sent to you in time.


Q: Can I customize shelving or racking at my own size?
A: Sure.


Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.